Give PERRLA this holiday season, for every paper still ahead. Give PERRLA

PERRLA/Guides/Turabian 9/Blog post

How to Cite a Blog Post in Turabian 9

In Turabian 9, a blog post gets a full footnote the first time you cite it and a shortened note after that. Turabian usually limits blog posts to the notes, so add a bibliography entry when the post is critical to your argument, you cite it often, or your instructor asks for one. The note gives the author's name in normal order, the post title in quotation marks, the blog's name in italics followed by the word blog in parentheses, the date of the post, and the URL: Francesca Coltrera, "Extreme Heat Endangers Older Adults: What to Know and Do," Harvard Health Blog (blog), July 16, 2025, https://www.health.harvard.edu/blog/extreme-heat-endangers-older-adults-what-to-know-and-do-202507163102. A bibliography entry, when you include one, starts with the author's last name.

The format

Last Name, First Name. "Title of the Post." Name of the Blog (blog). Month Day, Year. URL.

First, the easy way: PERRLA

Paste the post's URL into PERRLA's reference search. PERRLA recognizes many blog posts, including Substack and Medium posts and pages that sit on a site's blog, and fills in the author, the date, the post title, and the blog's name. Add a footnote where you cite it and PERRLA writes the full note the first time and the shortened note every time after, then builds your bibliography in alphabetical order.

Give three things a quick look before you move on. The author: if the byline says Guest Author or Admin, change it to the person the post names as its writer. The date: make sure it matches the date on the post. The blog name: match the name on the blog's masthead (Harvard Health Blog, not Harvard Health). If a post comes in as a Website reference, add it by hand as a Blog so the italics land on the blog's name and (blog) follows it.

Adding one by hand? Choose Blog, then A blog entry. Add each Individual Author (person), or use Group Author (Organization) for an organization or Username (screen name) for a writer known by a handle. Fill in the Blog Entry Title, the Blog Name, the Publication Date, and the URL (Web address). PERRLA handles the title case, the quotation marks, the italics, and (blog).

Not using PERRLA yet? Here is how to build the same bibliography entry by hand.

The parts of the bibliography entry

1. Author

The person who wrote the post is the author. In the bibliography, the first author's name is inverted: last name, a comma, then the first name. Every other author keeps normal order, with and before the last. In a note, every name is in normal order. Leave off credentials like RN or MD, and skip anyone credited only as a medical reviewer.

Jetelina, Katelyn, and Edward Nirenberg.

If the byline says Guest Author, Admin, or Staff, look for the writer's name at the top or bottom of the post. When the blog's own organization wrote it and the post names no person, the organization is the author.

2. Post title

Put the post's title in quotation marks, in title case. In the bibliography, a period goes inside the closing quotation mark. In a note, it's a comma.

"Extreme Heat Endangers Older Adults: What to Know and Do."

3. Blog name and (blog)

The blog's name goes in italics. Turabian adds the word blog in parentheses, in plain type, when the name doesn't already make it clear that the source is a blog and not a magazine or newspaper. PERRLA adds (blog) after every blog name, so a name that already says Blog, like Harvard Health Blog, gets it too. A Substack newsletter's name is the blog name.

Your Local Epidemiologist (blog).

4. Date

Give the full date of the post: month, day, and year, with the month spelled out.

September 22, 2026.

5. URL

End with the post's URL. Use the link to the post itself, not the blog's home page.

https://ajnoffthecharts.com/the-personalities-of-veins-what-thousands-of-iv-starts-have-taught-me/.

Examples

A blog post with one author

A Harvard Health Blog post on heat and older adults, written by the blog's editor and medically reviewed by a physician. The writer is the author. The reviewer doesn't go in the citation.

A guest post with a generic byline

A post on AJN Off the Charts, the blog of the American Journal of Nursing. The byline reads Guest Author, but the note at the end names the writer: Courtney Desy, BSN, RN, OCN, an oncology infusion nurse. She's the author, and her credentials stay out.

A Substack post with two authors

A post from Your Local Epidemiologist, the public health newsletter on Substack, by epidemiologist Katelyn Jetelina and Edward Nirenberg. The newsletter's name is the blog name. Both authors go in every note, joined by and.

Footnotes

Turabian's notes-bibliography style cites sources in numbered footnotes. A superscript number goes at the end of the sentence or clause, after the punctuation, and the note with the same number goes at the bottom of the page.

  • First note: the full citation, with the author's name in normal order and commas between the parts: Francesca Coltrera, "Extreme Heat Endangers Older Adults: What to Know and Do," Harvard Health Blog (blog), July 16, 2025, https://www.health.harvard.edu/blog/extreme-heat-endangers-older-adults-what-to-know-and-do-202507163102.
  • Later notes: the author's last name and a short title of four words or fewer in quotation marks: Coltrera, "Extreme Heat Endangers." Leave out the blog name, the date, and the URL.
  • Short titles drop a first A, An, or The: Desy, "Personalities of Veins."
  • Two or three authors: name them all in every note, joined by and: Jetelina and Nirenberg, "Your Guide."

Blog posts have no page numbers, so the note ends with the URL. To point to one spot in a long post, name the section heading in your sentence. Citing the same source as the note right before it? Turabian 9 prefers the shortened note over ibid., though ibid. is still allowed.

Common mistakes

  • Coltrera, Francesca, "Extreme Heat Endangers Older Adults: What to Know and Do," …Francesca Coltrera, "Extreme Heat Endangers Older Adults: What to Know and Do," …Only the bibliography inverts the author's name. Notes keep it in normal order.
  • Extreme Heat Endangers Older Adults: What to Know and Do, Harvard Health Blog"Extreme Heat Endangers Older Adults: What to Know and Do," Harvard Health Blog (blog)The post is a part of the blog, so its title goes in quotation marks and the blog's name gets the italics.
  • Your Local Epidemiologist, Substack, August 26, 2026Your Local Epidemiologist (blog), August 26, 2026Substack only hosts the newsletter. The newsletter's name is the blog name, and (blog) follows it.
  • Guest Author, "The Personalities of Veins …"Courtney Desy, "The Personalities of Veins …"A generic byline isn't an author. Find the writer's name in the post and use it.
  • Courtney Desy, BSN, RN, OCN, "The Personalities of Veins …"Courtney Desy, "The Personalities of Veins …"Leave degrees and credentials off the author's name.

Quick checklist

  • A full note the first time, a shortened note after
  • Notes: names in normal order, commas between parts
  • Bibliography: first author inverted
  • Post title in quotation marks, blog name in italics
  • (blog) after the blog's name
  • Full date of the post and the post's URL

Questions students ask

Do I italicize the blog name or the post title in Turabian?

The blog name. The post title goes in quotation marks, the same way an article title does, and the blog's name goes in italics with (blog) after it.

Why does (blog) come after the blog's name?

It tells your reader what kind of source it is. Turabian calls for it when the blog's name doesn't say so: without it, Your Local Epidemiologist could be a magazine or a newsletter in print. The word blog goes in parentheses, in plain type, after the italic name. PERRLA adds it after every blog name, even one that already ends in Blog.

How do I cite a Substack or Medium post in Turabian?

As a blog post. The newsletter's or publication's name is the blog name, followed by (blog). Substack and Medium are only the platforms, so they stay out of the citation.

Do I need a bibliography entry for a blog post?

Usually not. Turabian says blog posts can usually be cited in notes alone, with a bibliography entry only for a post that is critical to your argument or that you cite often. If you cite several posts from one blog, you can list the blog as a whole in the bibliography instead. Many instructors still want every source listed, so check your assignment: PERRLA writes the entry either way, and you can leave it out of your list.

How do I cite a comment on a blog post?

Cite it in a note only, with the commenter, the date of the comment, comment on, and the post's author and title. Reader comments don't go in the bibliography. The online comment guide has examples.

Rules checked against Kate L. Turabian's A Manual for Writers of Research Papers, Theses, and Dissertations (9th ed.), chapters 16 and 17 (17.5.2: the post title in quotation marks, the blog title in italics with (blog) when the title doesn't make it clear, and blog posts usually cited in notes only; 16.4.1: short titles of up to four words with no opening article), the Turabian Citation Quick Guide, and The Chicago Manual of Style (17th ed.), 14.208. Example posts verified on each post's own page: author, title, blog name, and date.

PERRLA writes the full note, the shortened note, and the bibliography entry from the post's URL.

Try PERRLA free for 7 days